today is a wednsday challenge and we got to pick our groups.
I got lucky and got a good group of these people.
wc1
today we have a sub so we are watching a movie
it is about mars and making it to mars.
i got sick so i dont know what we did. i was sick for 3 days so i dont have a clue what we did.
today i sketchuped a wheel here it is.
today was a thursday challenge and we had to make E's. we got to build an easy one so we were good. we just cut it out of cardboard and that was it.
today we started the lego robot challenge and eric showed us how all the challenges work. we have to design a robot to do the challenges.
today i designed the arm for our lego robot. it was very hard to make it actually work and be stable.
it was also a wednesday challenge so we had to make a initial cad but i was doing robots.
today i programed the robot to move but not do any challenges.
today we got a wednesday challenge so i joined a group with james and kyle and we have to get a chip to go through mail without breaking. we have a idea we are going to try.
today we did some more lego stuff and we finished two challenges. we did the door challenge and the turning stuff challenge. it was pretty cool.
today i was at the hospital because i broke my finger so i dont know what we did but i think we just did websites.
today we are working on websites but im doing lego and tomorrow is out last day. i hope we can do atleast 2 challenges.
its the last day of lego and we did two challenges and got 30 points. i think we did pretty good. hopefully next time we do better.
today i start my car and i dont know what to make it look like. i am going to maybe make it thin with 6 wheels.
today we are working on websites and cars so i added some new entries. im going to start making my car.
so on robotics i have been working on making a battery box. i cut the pieces and measured and i started welding.
03/6/15 today we ripped apart a tote to see the battery. we got it to work for seconds but it turned off.
03/9/15 today james and i tried painting the totes and it didnt work at all. we are going to try to stamp the 589 in.
03/10/15 today we are working on websites and james and i are now on demolition so if we need a tote broken we break it. it is going to be fun.
03/11/15 today i started on my sketchup of my car. i hope i does good but im not sure if it will do well. it is going to be very arodinamic and it is hopefully goint to do good.
03/12/15 today james and i are helping pack for friday. we were working on the elevator when they put me in the robot costume and i fit perfictally so im the new mascot.
03/13/15
today there is a sub because there are peple at the competition already so we are doing websites.
03/22/15
today is the first day back from spring break. i wsas the maskot robot and i had alot of fun. we did pretty good and i cant wait for the next competition. i also got braces and went airsofting with james. i will put pictures but all the pictures are on facebook right now. the next contest is next friday and i cant wait.
04/2/15
i havent been updating because we just got back from ventura and we have been unpacking. i have starter cleaning the shop and today we finally finished and it is open house. so the last week has been awesome. we went to ventura and had a blast. the first day was inspection and we got it done and then attatched the elevator.
we also went swimming and we had a contest on who could throw me farthest.
04/7/15
so today we working on the mentor gifts and james hit me on the back and almost killed me. but it was and acident.
04/8/15
today we are doing a wednesday challenge and im a judge. we are figuring out what the mentor gift is. the judges are cole,james,rehana,and I.
04/9/15
today we are getting a talk about how to work in the class because on tuesday we had a bad day again.
Wed Chall
WD
04/10/15
today we have 2 hours or engineering. this is going to be fun. we worked on the schedule for the mentor gifts.
04/15/15
today we are working on the circuits and i am starting to do one.
04/17/15
today we are making some molds and some proto totes or hoping to. it is also a banking day and we have 2 hours in this class so thats cool.james and i are working on mr millers
tote and we are putting in a mill head i think.
04/20/15
today we are doing mentor gifts again and i think we are making a mold.
04/21/15
today we are making a tester tote to see if the mold is working correctly. we have not put a LED in a tote yet but we are going to try one on the tester.
04/22/15
today we pulled out the tote and we it looked very good. we hoped the light would work and we were happy to see it did but it was allitle dark so we have to find a way to fix that.
04/23/15
so today we are looking at making trash cans and it is looking expensive. we also have to paint them and that adds to the cost
04/24/15
there is a proto trash can and one tote that is done but empty. so i think it is all going good. we might be alittle done.
04/27/15
today we are casting the totes for the mentors and asking people for there tote fillers.
04/28/15
today we got the pvc and we had to cut and sand all the peaces. that was what we did all day and it was so boring.
04/29/15
today we painted for two hours and that was it. we painted all the trashcans. we had fun talking and stuff but it was 2 hours of painting.
04/30/15
today was the day of the banquet and we are in a rush. half of us stayed late to work and i only had 1 hour at home to shower. the banquet was fun and all the speaches were good and i think everything went well. i had a blast and there was a mini me cake. life size.
05/01/15
so today is the day after the banquet and we have to clean up. it isnt bad because we just get to talk and work all day but there is alot of junk on the table that we dont need.
05/04/15
today is another day of cleanup. we realizded we have to make more totes for mit's and mr. abrams. we didnt make his tote because we forgot so now we have to get all the stuff we just put away out again and make more totes.
05/05/15
today we have to try and work out a way to get the robot to hold and push a cake. we are going to use wood or hardboard but we dont know which one yet.
05/06/15
today is a wednesday challenge.
05/07/15
today we finished the cake platform but when testing we used a baloon as a childs head but we killed that child. it was a sad day. also we didnt get cake :(
05/08/15
today we have to work on websites and i have to help pack for the birthday party. i am bringing my mascot suit and it is hopefully going to be fun.
05/11/15
today we are working on 2012 stephanie to get her working because she broke a while ago. we have to take the arm off and figure out how it fits together.
05/12/15
today we are continueing to work on stephanie and we are going to get it working today.
05/13/15
wednesday challenge today and luke made the form here it is.
cancer
05/14/15
we didnt finish 2012 so we are continuing work today.
05/14/15
today is friday and i was working on my website and i ruined more stuff that i did right. apperantly i have a adobie problem so my wc form wont work so i have to fix it and now internet stoped working.
05/26/15
today we finished out cad and we are turning it in to the next group.
05/27/15
today we got our design and it is a bottle with wheels. thats it. we are finished making the proto and it doestnt go strait.
